ROBUSO-PROTON, coated 615/S/5" 5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut.Our customers also appreciate the light and smooth action of the scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO Proton 615/S/5" has been in use unchanged for many years, due to its good leverage and unusually high cutting force right into the tip. The tips of the thread scissors are rounded and they are ideal for cutting threads.ROBUSO Proton scissors for technical textiles are popular among our customers because the black coating ensures effective protection against abrasive wear. It creates a super hard surface in the area of the cutting edges.Due to the coating, the scissors can be easily cleaned with solvent.They have been specially developed to enable our customers to use their tools longer without having to regrind them, because the service life is approx. 2-3x longer than for scissors without special coating.The shears are especially well suited for cutting aramid, dyneema, carbon fiber and fiberglass.Technical data:Overall length 13 cm - 5" inch (cutting length: 4.2 cm).Weight 48 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCSurface: ROBUSO Proton coatingone cutting edge microserrated

ROBUSO-PROTON, coated 322/S/5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly qualified grinders and nailers. For easy and precise work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibres of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of the scissors, which makes for a pleasant cutting experience. We, from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are handmade from C60 carbon steel (not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability. Our ROBUSO Proton 322/S/5" has been in use unchanged for many years, due to its good leverage and unusually high cutting power right up to the tip. The tips of the thread scissors are rounded, they are ideal for cutting threads and can be used universally. The ROBUSO Proton scissors for technical textiles are popular with our customers because the black coating ensures effective protection against abrasive wear. It creates a super hard surface in the area of the cutting edges. Because of the coating, the scissors can be easily cleaned with solvent. They have been specially developed to enable our customers to use their tools for longer without having to regrind them, as the service life is approx. 2-3 times longer than for scissors without a special coating. The shears are particularly well suited for cutting aramid, dyneema, carbon fibre and glass fibre. Technical data: Total length 13.3 cm - 5" inch (cutting length: 4 cm). Weight 56 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Surface: ROBUSO Proton coating both cutting edges microserrated

ROBUSO-PROTON, coated 1071/S/7.75"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly qualified grinders and nailers. For easy and precise work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibres of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of the scissors, which makes for a pleasant cutting experience. We, from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are handmade from C60 carbon steel (not stainless). With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability. Our ROBUSO Proton 1071/S/7,75" has been in use unchanged for many years, due to its good leverage and its unusually high cutting force right into the tip. The mould making shears are suitable for short powerful cuts, for cutting corners and edges. The ROBUSO Proton shears for technical textiles are popular with our customers because the black coating ensures effective protection against abrasive wear. It creates a super hard surface in the area of the cutting edges. Because of the coating, the scissors can be easily cleaned with solvent. They have been specially developed to enable our customers to use their tools for longer without having to regrind them, as the service life is approx. 2-3 times longer than for scissors without a special coating. The shears are particularly well suited for cutting aramid, dyneema, carbon fibre and glass fibre. Technical data: Total length 20 cm - 7.75" inch (cutting length: 5 cm). Weight 208 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Surface: ROBUSO Proton coating one cutting edge microserrated

ROBUSO-PROTON Trimming shears, coated 1041/S/10"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut.Our customers also appreciate the light and smooth action of the scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Proton 1041/S/10" left hand scissors have been in use unchanged for many years, due to their good leverage and unusually high cutting force right into the tip. ROBUSO Proton scissors for technical textiles are popular among our customers because the black coating ensures effective protection against abrasive wear. It creates a super hard surface in the area of the cutting edges. Due to the coating, the scissors can be easily cleaned with solvent. They are specially designed to allow our customers to use their tools longer without having to resharpen them, because the service life is about 2-3x longer than scissors without special coating. In the left-hand model, the blades and handles of the scissors are mirror-inverted. This allows left-handed people to work upright with a clear view of the cut material. The shears are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass. Technical data: Overall length 26 cm - 10" inch (cutting length: 10.5 cm). Weight 340 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Surface: ROBUSO Proton coating one cutting edge microserrated

ROBUSO-PROTON Left-hand scissors, coated 1024/S/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of the scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally long service life and durability. Our ROBUSO Proton 1024/S/10" left hand scissors have been in use unchanged for many years due to their excellent leverage and unusually high cutting force right into the tip. ROBUSO Proton scissors for technical textiles are popular with our customers because the black coating ensures effective protection against abrasive wear. It creates a super hard surface in the area of the cutting edges. Due to the coating, the scissors can be easily cleaned with solvent. They are specially designed to allow our customers to use their tools longer without having to resharpen them, because the service life is about 2-3x longer than scissors without special coating. In the left-hand model, the blades and handles of the scissors are mirror-inverted. This allows left-handed people to work upright with a clear view of the cut material. The shears are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass. Technical data: Overall length 21 cm - 8" inches (cutting length: 9 cm). Weight 191 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Surface: ROBUSO Proton coating one cutting edge microserrated left hand

With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Weaver's Shears 322/E/5"" have been in use unchanged for several years, as their good leverage allows easy cutting right to the tip. It is a very sturdy model with tapered blades. It is ideal for cutting glass, carbon fiber and aramid threads. Technical data: - Overall length 13.3 cm - 5" inches (cutting length: 5 cm). - Weight 56 g - material: C60 carbon steel with hardness of approx. 59-60 HRC - one cutting edge microserrated

ROBUSO Weaver's shears, strong 615/E/5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Weaver's Shears 615/E/5"" have been in use unchanged for several years, because their good leverage allows easy cutting right to the tip. It is a very strong model with hardened screw. Ideal for cutting glass, carbon fiber, and aramid threads. Technical data: Overall length 13 cm - 5" inches (cutting length: 4.2 cm). Weight 48 g Material: C60 carbon steel with hardness of approx. 59-60 HRC surface: nickel-plated one cutting edge microserrated

ROBUSO Weaver and pocket scissors 721/E/4"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Weaver and Pocket Shears 721/E/4" have been in use unchanged for several years, because their good leverage allows easy cutting right to the tip. The scissors are micro-serrated on both sides, completely nickel-plated and their tips are rounded. It is ideal for cutting very thin glass, carbon fiber and aramid threads. Technical data: Overall length 10.5 cm - 4" inches (cutting length: 3.8 cm). Weight 23 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC surface: nickel-plated both cutting edges microserrated

ROBUSO Scissors left hand, serrated 1041/C/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO left hand scissors 1041/C/8" have been in use unchanged for many years, as their good leverage allows for easy cutting all the way to the tip. They are left-handed shears with mirror-inverted blades and handles, which allows left-handed users to work upright with a clear view of the material being cut. The ROBUSO cutting scissors for technical textiles convince by their powder-coated handles with non-slip textured surface. This allows a safe guiding of the scissors even with oily hands or gloves, it enables a high impact resistance and creates improved resistance to heat, sweat and moisture. The blue-ground blades are a very special quality feature for scissors. This fine grinding provides, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass. Technical data: Overall length 21 cm - 8" inches (cutting length: 9 cm). Weight 191 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Blue pierced scissors blades one cutting edge micro-serrated

ROBUSO scissors for strong cuts - for technical textiles - 1071/C/7,75"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Scissors 1071/C/7.75" have been in use unchanged for many years because their good leverage allows easy cutting all the way to the tip. The scissors' short, strong blades and long handles make them ideal for short, strong cuts in light and medium weight fiberglass, carbon fiber, aramid fabrics, knits and felts. The shears are also a very good solution for cutting tapes, cords, thin ropes and hoses with aramid core. The ROBUSO cutting shears for technical textiles convince by their powder-coated handles with non-slip textured surface. This allows a safe guiding of the scissors even with oily hands or gloves, it enables a high impact resistance and creates improved resistance to heat, sweat and moisture. The blue-ground blades are a very special quality feature for scissors. This fine grinding provides, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass. Technical data: Overall length 20 cm - 7.75" inches (cutting length: 5 cm). Weight 208 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Blue pierced scissors blades one cutting edge micro-serrated

ROBUSO Pneumatic scissor with smooth cutting made of high strength tool steel for cutting cured GFRP and CFRP laminates, also suitable for thin metals.Technical data:    Weight - 1,4Kg    handle diameter - 40mm    length - 230mm    Cutting height max - 10mm    Cutting speed - 19m/min    pressure - 450l/min/6bar

ROBUSO Mold making scissors, handles curved 1026/3/C/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO 1026/3/C/8" scissors have been in use unchanged for many years, because their good leverage allows easy cutting right to the tip. This mold making shear for trimming edges is a special ROBUSO development, with straight blades and curved handles. The ROBUSO trimming shears for technical textiles convince by their powder-coated handles with non-slip textured surface. This allows a safe guiding of the scissors even with oily hands or gloves, it enables a high impact resistance and creates improved resistance to heat, sweat and moisture. The blue-ground blades are a very special quality feature for scissors. This fine grinding provides, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass. Technical data: Overall length 21 cm - 8" inch (cutting length: 8 cm). Weight 166 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Blue pierced scissors blades one cutting edge micro-serrated

With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Laminating Scissors 1253/4/B-CR/7" has been in use unchanged for many years, because its good leverage allows easy cutting right to the tip. It is a sturdy mold making shear for glass and carbon fiber, as well as wet laminates. The blades of the scissors are curved and the handles are cranked. It is ideal for trimming edges and borders in mold making. ROBUSO mold making scissors for technical textiles are mainly used for cutting wet laminates. The steel-chrome plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible. The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials. Technical data: - Overall length 18.5 cm - 7" inches (cutting length: 6.5 cm). - Weight 111 g - Material: C60 carbon steel with hardness of approx. 59-60 HRC - Blue pierced scissors blades - one cutting edge micro-serrated

ROBUSO Mold making scissors, curved + cranked 1076/4/B-CR/7"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO laminating scissors 1076/4/B-CR/7" have been in use unchanged for many years, because their good leverage allows easy cutting right to the tip. It is a lightweight shear for light glass and carbon fiber, as well as wet materials. It is characterized by its short curved blades, offset handles and double-sided micro serrations. The mold making scissors are ideally suited for precise cutting of edges and borders. The ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel-chrome plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible. The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials. Technical data: Overall length 18.5 cm - 7" inches (cutting length: 4.5 cm). Weight 85 g Material: C60 carbon steel with hardness of approx. 59-60 HRC Blue pierced scissors blades one cutting edge micro-serrated

ROBUSO Mold making scissors, chrome plated 1026/B-CR/8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Laminating Shears 1026/B-CR/8" have been in use unchanged for many years, because their good leverage allows easy cutting right to the tip. Due to its straight tapered blades, it is ideal for cutting when laminating glass or carbon fiber. ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel chrome-plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible. The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials. Technical data: Overall length 21 cm - 8" inches (cutting length: 8 cm). Weight 166 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Blue pierced scissors blades one cutting edge micro-serrated

ROBUSO Mold Making Shears, Chrome Plated + Bent & Offset 1026/4/B-CR/8"With much love and care, our shears are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO laminating scissors 1026/4/B-CR/8" have been in use unchanged for many years, because their good leverage allows easy cutting right to the tip. The slim trimming shears with curved blades and handles are a special development by ROBUSO. With two tapered blades, an oversized long eye and a very convenient pivot point. The shears are ideal for edge cutting wet laminates.The ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel chrome-plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible.The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait.The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials.Technical data:Overall length 21 cm - 8" inches (cutting length: 8 cm).Weight 166 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCBlue pierced scissors bladesone cutting edge micro-serrated

With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO Laminating Shears 405/2/B-CR/6" have been in use unchanged for many years, because their good leverage allows easy cutting right to the tip. Due to its fine and tapered curved blades, it is the ideal shear for cutting light glass and carbon fiber, as well as wet laminates.ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel-chrome plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible.The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait.The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials.Technical data:- Overall length 16 cm - 6" inches (cutting length: 5 cm).- Weight 60 g- Material: C60 carbon steel with a hardness of approx. 59-60 HRC- Blue pierced scissors blades- one cutting edge micro-serrated

ROBUSO Mold making scissors, chrome plated & bent up 1026/2/B-CR/ 8"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO Laminating Shears1026/2/B-CR/8" have been in use unchanged for many years, because their good leverage allows easy cutting all the way to the tip. The slim trimming shear with curved blades is a special development by ROBUSO. With two tapered blades, an oversized long eye and a very favorable pivot point.The ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel-chrome plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible.The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait.The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials.Technical data:Overall length 21 cm - 8" inches (cutting length: 8 cm).Weight 166 gMaterial: C60 carbon steel with a hardness of approx. 59-60 HRCBlue gritted shear blades

ROBUSO left hand scissors, toothed 1041/C/10".With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO left hand scissors 1041/C/10" have been in use unchanged for many years, as their good leverage allows for easy cutting all the way to the tip. They are left-handed shears with mirror-inverted blades and handles, which allows left-handed users to work upright with a clear view of the material being cut.The ROBUSO cutting scissors for technical textiles convince by their powder-coated handles with non-slip textured surface. This allows a safe guiding of the scissors even with oily hands or gloves, it enables a high impact resistance and creates improved resistance to heat, sweat and moisture.The blue-ground blades are a very special quality feature for scissors. This fine grinding provides, among other things, a particularly smooth and easy gait.The scissors are particularly well suited for cutting aramid, dyneema, carbon fiber and fiberglass.Technical data:Overall length 21 cm - 8" inches (cutting length: 9 cm).Weight 191 gMaterial: C60 carbon steel with hardness of approx. 59-60 HRCBlue pierced scissors bladesone cutting edge micro-serratedLeft hand scissors

ROBUSO Laminating scissors, chrome-plated 1026/B-CR/ 9.5"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers.For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience.We from Solingen, attach great importance to quality and durability in the manufacture of our scissors.Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity.Our ROBUSO Laminating Shears 1026/B-CR/9.5" have been in use unchanged for many years, because their good leverage allows easy cutting all the way to the tip. Due to its straight tapered blades, it is ideal for cutting when laminating glass or carbon fiber.ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel-chrome plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible.The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait.The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials.Technical data:Overall length 25 cm - 9.5" inches (cutting length: 9.5 cm).Weight 230 gMaterial: C60 carbon steel with hardness of approx. 59-60 HRCBlue pierced scissors bladesone cutting edge micro-serrated

ROBUSO Laminating scissors, chrome plated 1024/B-CR/10"With much love and care, our scissors are masterfully straightened, ground and assembled by our highly skilled grinders and nailers. For easy and accurate work with our special developments, a fine micro-serration is applied to one of the two cutting edges of the scissors. It fixes the fibers of the material during the cut and enables an even and precise cut. Our customers also appreciate the light and smooth action of our scissors, which ensures a pleasant cutting experience. We from Solingen, attach great importance to quality and durability in the manufacture of our scissors. Because of this, they are made of C60 carbon steel (carbon steel - not stainless), handmade. With our 100 years of experience in manufacturing, our scissors stand for an exceptionally high durability and longevity. Our ROBUSO Laminating Shears 1024/B-CR/10" have been in use unchanged for many years, because their good leverage allows easy cutting all the way to the tip. Its straight blades make it ideal for cutting when laminating glass or carbon fiber. The ROBUSO mold making shears for technical textiles are mainly used for cutting wet laminates. The steel chrome-plated, smooth surface facilitates the cleaning process after working with sticky materials. With solvent, the residues on the scissors are easy to remove immediately after use. Curing of adhesive or resin residues should be avoided if possible. The blue-ground scissor blades are a very special quality feature for scissors. This fine grinding ensures, among other things, a particularly smooth and easy gait. The scissors are particularly well suited for cutting carbon fiber, fiberglass and wet materials. Technical data: Overall length 26 cm - 10" inch (cutting length: 10 cm). Weight 361 g Material: C60 carbon steel with a hardness of approx. 59-60 HRC Blue splintered scissors blades one cutting edge micro-serrated

Powerful cordless cutter for cutting technical textiles.These cordless shears work on the principle of hand shears, where the cutting action is generated by the up-and-down movement of the upper blade against the fixed lower blade.In contrast to machines with circular knives, the principle of the pulling cut means that no material can be wound up and the view of the cutting process and the material being cut is always unobstructed.The upper blade B45 allows an effortless, clean and multilayer cut through almost all technical fibers such as aramid, glass and carbon fiber, Dynema and many more.Scope of delivery:    2 pcs. rechargeable batteries 18V/5Ah    Charger 230 V    Battery scissors BA45Technical data:    Voltage - 18V    Idle speed min - 18.000    No-load stroke rate stroke/min - 1.600    Weight, with battery - 2,8Kg    Length, with battery - 390mm

Powerful cordless shears for cutting technical textiles.These cordless shears work on the principle of hand shears, where the cutting action is generated by the up-and-down movement of the upper blade against the toothed fixed lower blade.In contrast to machines with circular blades, the principle of the pulling cut means that no material can be wound up and the view of the cutting process as well as of the material being cut is always unobstructed.The upper blade B71 allows an effortless, clean cut through virtually all technical fibers such as aramid, glass and carbon fiber, and more.Scope of delivery:    2 pcs. rechargeable batteries 18V/5Ah    Charger 230 V    Battery scissors BA71Technical data:    Voltage - 18V    Idle speed min - 18.000    No-load stroke rate stroke/min - 1.600    Weight, with battery - 2,8Kg    Length, with battery - 390mmVideo: